Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Abstract Submission Deadline: February 19, 2011.
ICCM18 Program Committee cordially invites you to submit abstracts for oral presentation for general/organized session and poster presentations. All abstracts should be submitted online. In case of general session/poster session, all abstracts will be reviewed by the program committee or session organizers and assigned to the appropriate session for oral and poster presentations. In case of organized session, each session organizer will review the abstract and select the presenters for session.
 
Abstract Submission Guideline
The submission of an abstract implies your consent to publish it in the ICCM18 proceeding and that the author will participate in the ICCM18. Each registration with full payment is entitled to only one presentation. All presenting authors of accepted abstracts are expected to attend the conference and register via online registration by May 31, 2011. Also, all selected presenters should submit the full paper by May 31, 2011. If the presenting author does not register by May 31, 2011, the abstract may be automatically withdrawn from the final program.
 
Please check the information below before sending abstract.
1. Abstracts should be submitted online.
2. Each registration with full payment is entitled to only one presentation.
3. Abstracts should be submitted in English using the abstract template form which can be downloaded.
4. Authors may further edit and modify submitted abstracts until the submission deadline. It is the responsibility of the authors to ensure that their text does not contain typos or grammatical errors.
5. No proofreading will be carried out, and no correction will be possible after the submission deadline.
6. Authors have the option of choosing their presentation type (oral or poster).
7. All presenters should submit full paper by May 31. Selected papers through final review will be published in special issues of SCI or SCI-E journals.
Special Issues on :
- Composites Part A: Applied Science and Manufacturing
- Journal of Composite Materials
 
‘General Session’ Abstract Submission Topics included but are not limited to
Active and Passive Health Monitoring
Applications of Composites
Bio-inspired Composites
Biomedical Composites
Carbon and Ceramic Matrix Composites
Damage and Fracture
Durability and Aging
Emerging NDE Technology and Reliability Issues
Energy Technology Applications
Environmental Awareness and Life Cycle Analysis
Experimental Techniques
Fibres, Matrices and Interfaces
General Industrial Applications
Green Composites
Health Monitoring
Impact and Dynamic Response
Information Technology Applications
Infrastructure
Interlaminar reinforcements
  Joints and Bearing Behavior
  Life Cycle Analysis and Sustainability
  Low Cost Technologies
  Mechanical and Physical Properties
  Metal Matrix Composites
  Multi-functional Composites
  Multi-scale Modeling
  Nanocomposites
  NDE Technologies
  Probabilistic Approaches and Design
  Processing and Manufacturing Technologies
  Recycling
  Repair Technologies
  Sandwich Technologies
  Standardization
  Structural Response and Design
  Technology Transfer
  Textile Composites
  Wood and Paper
‘Organized Session’ Abstract Submission Topics  as of February 8th
Topic Session Organizer
Advanced Computational Strategies for Simulating Composites Structures and Manufacturing Processes Francisco Chinesta
Aerospace Application of Composite Materials Paul T. Curtis
Aerospace Applications (Application of Composite Materials for Aerospace Applications) Jae-Hung Han
Analysis of Dental Composite Restoration Nak-Sam Choi
Application for Aerospace Seong Kyun Cheong
Application for Aerospace Yasuhiro Yamaguchi
Application of Composites Yun-Hae  Kim
Applications of Composite Materials for Maintenance Sangkeun Oh
Applications of Composites Seung-Hwan Chang
Applications of Composites or Joints Jung Seok Kim
Atoms to Aircraft R. Byron Pipes
Automotive Application Jun Takahashi
Biocomposites: Synthesis, Processing, Performance and Applications of Biobased Composite Materials(Co-Sponsored with BIRN) Selvum Pillay
Biomedical Composite Materials and Structures Satoshi Kobayashi
Biomedical Composite Materials and Structures Mitsugu Todo
Biomimetic Composite and Applications Kwang Joon Yoon
Carbon and Ceramic Matrix Composites Hiroshi Hatta
Carbon and Ceramic Matrix Composites Hong Gun Kim
Carbon Nanocomposites and Hybrid Advanced Composites Brian L. Wardle
Carbon Nanofibers  Woong-Ryeol Yu
Ceramic and Carbon Matrix Composites Jacques Lamon
Ceramic Matrix Composite Hai-Doo Kim
Composite Forming
Experimental Analyses and Numerical Simulation of the Forming Processes of Composite Materials		 Philippe Boisse
Composite Joints Jifeng Xu
Composite Materials for Construction Yun-Mook Lim
Haeng-Ki Lee
Composite Materials from Biorenewable Resources Michael Kessler
Composites Kwangsoo Kim
Composites for Automotive Jan-Anders E. Manson
Composites in Biomimetics Hoon Cheol Park
Damage in Composites or Mechanical Properties Takahira Aoki
Damage Tolerance and Impact Session Richard Butler
Takashi Ishikawa
Delamination and Interlaminar Reinforcement Naoyuki Watanabe
Masaki Hojo
Durability and Aging of Composite Materials Frédéric Jacquemin
Durability of Composites Alain Vautrin
Durability of Polymer Matrix Composites Masayuki Nakada
Energy Technology Applications (Solar Cell, Wind Energy, Fuel Cell Application) Hak-Sung Kim
Fatigue and Life Prediction of Composites Masamichi Kawai
Fibres, Matrices and Interfaces Jae-Rock Lee
Full-field Measurements for Composites Testing Fabrice Pierron
Graphene and CNT based Multi-functional Nanocomposites Seokwoo Jeon
Graphene and Graphite Nanocomposites Jang-Kyo Kim
Green Composites Yan Li
Green Composites Donghwan Cho
Hierarchical Multi-Scale Modeling Analysis Methodologies for Aerospace Applications Jon Gosse
Steve Christensen
High Performance and Sustainable Composite Materials Kazuro Kageyama
High Performance Composites Byungil Yoon
Jongkyoo Park
Ilsung Seo
High-precision Composites Jun Koyanagi
Impact and Dynamic Response Yoshio Aoki
Impact and Dynamic Response Keiji Ogi
Impact and Dynamic Response In-Gul Kim
Infrastructure, Nanocomposites Haeng-Ki Lee
Intelligent textiles and composites Tae Jin Kang
Investigation on Advanced Reinforcement Fibres and Matrices Edith Mäder
KASHMOS(Korean Aero-vehicle Structural Health Monitoring System) Seung-Moon Jun
Chan-Yik Park
KASSAT(Korean Aero-vehicle Smart Skin Antenna Technology) & FMAV Seung-Moon Jun
Chan-Yik Park
Lightweight Sandwich Plate with Three-dimensional Cores Dong-Gyu Ahn
Manufacturing Processes for Composite Materials Suresh G. Advani
Materials and Product Certification William R. Broughton
Mechanical Properties and Mechanics of Short Fiber Composites Hiroyuki Hamada
Metal Matrix Composites Gen Sasaki
Metal Matrix Composites Sergei Mileiko
Micromechanics of Composites and Heterogeneous Materials: Multiscale Modeling and Homogenization Igor I. Tsukrov
Thomas Böhlke
Romana Piat
Multiaxial Fatigue of Composites M. Quaresimin
Multifunctional Composites Paul T. Curtis
Multi-functional composites Junkyung Kim
Multifunctional Composites for Energy Performance and Efficiency James Thomas
Multiphase Nanoparticle–microfiber Composites Jang-Kyo Kim
Multiscale Modeling and Simulation of Nanocomposites Maenghyo Cho
Multiscale modeling of Composites : from molecular scale to structures Charles Lee
Jim Chang
Nano Composite in Energy Applications Sung-Hoon Ahn
Nano Fiber Composites Tae Jin Kang
Nanocomposites Zhiyong (Richard) Liang
Nanocomposites Joong Hee Lee
Nanocomposites Soon Hyung Hong
Nanocomposites and Polymer Nanocomposites including Carbon Nanotubes or Graphene Chong Rae Park
Do Sung Huh
Soo Jin Park
Nano-material Composites for Electrochemical Applications Seong-Yop Lim
Nano-particle Reinforced Polymer Composites for Engineering Applications Klaus Friedrich
Natural Fiber Composite Materials Jung-Il Song
Natural Fibre Composites Alan K. T.Lau
NDE Michele Meo
New Advancements in Manufacturing Thermoplastic Fiber Reinforced Polymer Composites for Large-scale Production Peter Mitschang
Ralf Schledjewski
Non-Destructive Evaluation Dong-Jin Yoon
Numerical Methods in Composite Materials See Jo Kim
ONR SESSIONS - Research in Composites Materials and Sandwich Structures Yapa D. S. Rajapakse
Young W. Kwon
Yasushi Miyano
Polymer Composites with Shape Memory Function Jozsef Karger-Kocsis
Polymer Matrix Composites Chongsoo Park
Polymer Nanocomposites and Their Applications Zhong Zhang
Polymer Nanocomposites Suong Van Hoa
Processing and Manufacturing Technologies Goichi Ben
Processing and Manufacturing Technologies Arnaud Poitou
Processing of Out-of-autoclave Prepregs Pascal Hubert
Processing, Property and Analysis of Carbon Nanotube/Polymer Composites Yoshinobu Shimamura
Ning Hu
Toshio Ogasawara
Tomohiro Yokozeki
Progressive Damage and Failure Tong-Earn Tay
Pedro P. Camanho
Research and Development of Green Composites Koichi Goda
Kazuya Okubo
Yoshihito Ozawa
Hitoshi Takagi
Kenichi Takemura
Sandwich Materials and Structures Ole Thybo Thomsen
Sensing and Interfacial Properties of Nanocomposites Joung-Man Park
Simulation-Based Design and Optimization Abbas S. Milani
Simulation-Based Design and Optimization Xiongqi Peng
Smart Actuatros and its Applications Nam Seo Goo
Smart Composite Materials Jinsong Leng
Chun-gon Kim
Smart Structure and Materials Ki Soo Kim
Stability of Thin Walled Structures Haim Abramovich
Stength & Life Prediction for Composites Sung Kyu Ha
Structural behaviour of composites subjected to blast/impact and other loading conditions Zhongwei Guan
Structural Health Monitoring and Management(SHM) Nobuo Takeda
Alfredo Güemes
Jeong-Beom Ihn
Alan K,T, Lau
Christophe Paget
Lin Ye
Structural Response and Design Changduk Kong
Jungsun Park
Structural Response and Design KwangBok Shin
Textile Composites Joon-Hyung Byun
Textile Composites: 3D preforming and Damage Tolerance Prasad Potluri
Thermoplastic composite materials Alfonso  Maffezzoli
 
Steps for Submitting Abstracts
 
Notification of Acceptance
All submitted abstracts will be reviewed by the Program Committee or Session Organizer according to the standard review procedures. Notification of acceptance will be sent by e-mail to corresponding, presenting and abstract submitting authors by March 31, 2011.
 
Withdrawn Abstracts
If you must withdraw an abstract, please notify the ICCM18 Secretariat in writing as soon as possible. If the presenting author of accepted abstract does not register by May 31, 2011, the abstract may be automatically withdrawn from the final program.